Lectrosonics IFBR1A/E01 UHF Récepteur ceinture IFB- block 24
Description
LECTROSONICS import JBK MARKETING.
Lectrosonics en video, Academy Award 2017
Sur Devis, info@jbkaudioshop.com
Catalogue Général Lectrosonics (9,9 Mo).
Bandes de fréquences disponibles à spécifier à la commande.
Block 19 - 486.4 to 511.9 MHz. ch 23 to 26.
Block 20 - 512.0 to 537.5 MHz. ch 26 to 29.
Block 21 - 537.6 to 563.1 MHz. ch 29 to 32.
Block 22 - 563.2 to 588.7 MHz. ch 32 to 35.
Block 23 - 588.8 to 614.3 MHz. ch 35 to 39.
Block 24 - 614.4 to 639.9 MHz. ch 39 to 42.
Block 25 - 640.0 to 665.5 MHz. ch 42 to 45.
Block 26 - 665.6 to 691.1 MHz. ch 45 to 48.
Block 27 - 691.2 to 716.7 MHz. ch 48 to 51.
Block 28 - 716.8 to 742.3 MHz. ch 51 to 55.
Block 29 - 742.4 to 767.9 MHz. ch 55 to 58.
Block 30 - 768.0 to 793.5 MHz. ch 58 to 61.
Block 31 - 793.6 to 819.1 MHz. ch 61 to 64.
Block 32 - 819.2 to 844.7 MHz. ch 64 to 67.
Block 33 - 844.8 to 861.9 MHz. ch 67 to 69.
Block 470 - 470.1 to 495.6 MHz. ch 21 to 24.
Block 606 - 606.0 to 631.5 MHz. ch 38 to 41.
- Preset frequency can be set without power or transmitter signal
- Scan mode stores up to five additional frequencies
- Multi-color LED and rotary control for programming and operation
- High sensitivity for extended operating range indoors or outdoors
- Rugged machined aluminum housing
- Attached battery door
- 8 hours battery life (alkaline)
- 20 hours battery life (lithium)
- 256 frequencies in 100 kHz increments
- Microprocessor controlled
- Pilot tone squelch
- Compandor noise reduction
Wireless IFB (interruptible fold back) systems are used for talent cueing and crew communications in broadcast and motion picture production. In other cases, the IFB system is used by directors and other management to monitor program audio during a production. The IFB R1a receiver provides simplicity and flexibility in a package that is intuitive for untrained users to operate.
The receiver is housed in a rugged machined aluminum package. An optional spring-loaded belt clip (shown at right) provides a secure mounting on a wide variety of belts, pockets and fabrics. The belt clip is removable to reduce its size and allow mounting into other types of bags and belt worn mounting systems common in field production.
Firmware Version 4
New IFBR1a receivers in the UHF blocks shipping from the factory already have this new firmware installed. If users with older units wish to have the new firmware installed at the factory via the Parts & Repair department, the cost is $60 per unit to cover labor and handling.
INCLUS:
- 1 - 9-volt (Part #40013)
- 1 - Adjustment Tool (Part #35679)
- 1 - Velcro Strain Relief (Part #VSR1)
- 1 - Pouch (Part#35698)
- 1 - Manual